Protocol
Protein(RuCHMO/GDH) Conjugation to DNA Origami
Methods
Conjugation
- Proteins containing 6x Histidine at the C terminus reacted, with the chemical DBCO-PEG4-Bis-sulfone(DPBS) for 4 h at room temperature. The bis-sulfone group reacts with the Histidines at the C terminus of the protein, and then an azide modified oligonucleotide is conjugated to the protein by click chemistry between the azide- and the DBCO-group.
Incubation
- conjugation: DNA Origami = 20:1, and incubate in a PCR machine with a temperature ramp starting from 1 h at 37 ℃ follow by 14 h at 22 ℃, and immediately after incubation the nanopatterns are stored at 4 ℃.
Oligonucleotide Sequence
- sequence(RuCHMO):CTCTCCTTCTTCCCTTTCTTT
- Sequence(GDH):TTCGACAGCATGAACATCAGC
Protein
- RuCHMO: 65.45 KDa
- GDH: 35 KDa
Purification
- 30 kDa MWCO 0.5 ml Amicon centrifugal filters (Milli-pore)
electro-phoresis
| Reagent | Sequence |
|---|---|
| DBCO-PEG4-Bis-sulfone | |
| azide modified oligonucleotide | CTCTCCTTCTTCCCTTTCTTT |
| azide modified oligonucleotide | TTCGACAGCATGAACATCAGC |
Protocol (版本 1.0)
一、酶-核酸杂交体的制备
1. GDH 制备
取 1.4 mg GDH 溶解于 2 mL 1×PBS 中。
2. 稀释 GDH(样品液)
| 样品 | 原样品浓度 | 终样品浓度 | 加入量 | 总体积 |
|---|---|---|---|---|
| GDH | 0.7 mg/mL | 0.175 mg/mL | 25 μL | 100 μL |
3. 溶解 DBCO-PEG4-Bis-Sulfone 于 DMF(N,N-二甲基甲酰胺) 中(100 mM)
取 DBCO 2 mg 溶解DMF 20 ul 中
4. 稀释 DBCO(样品液)
| 样品 | 原样品浓度 | 终样品浓度 | 加入量 | 总体积 |
|---|---|---|---|---|
| DBCO | 100 mM | 20 mM | 2 μL | 20 μL |
5. 向 GDH 样品液中加入 DBCO,并在室温下孵育 4 h
| 样品 | 最终浓度 | 分子量 | 总摩尔量 | Eq DBCO | DBCO 摩尔量 | DBCO 加入量 | 总体积 |
|---|---|---|---|---|---|---|---|
| GDH | 5 mM | 35 kDa | 0.5 nMol | 20 Eq | 10 nMol | 1 μL | 100 μL |
6. 使用 10 kDa 超滤管超滤去除游离 DBCO
7. Oligo
| Name | 序列 | bp | 修饰 | Nmol/管 | buffer (μL) | 浓度 (mM) |
|---|---|---|---|---|---|---|
| S1 | CTCTCCTTCTTCCCTTTCTTT | 21 | 5'Azide | 123.53 | 123.53 | 1 |
| S2 | TTCGACAGCATGAACATCAGC | 21 | 5'Azide | 97.51 | 97.51 | 1 |
7. 加入 Oligo,并在 37 ℃ 下孵育 4 h
| 样品 | 总摩尔量 | Eq Oligo | Oligo 摩尔量 | S1 加入量 | 总体积 |
|---|---|---|---|---|---|
| GDH | 0.5 nMol | 20 Eq | 10 nMol | 10 μL | 100 μL |
Nativepage
制胶
| 成分 | 体积/质量 |
|---|---|
| 30% ACR: Bis(29:1) | 4.8 ml |
| Tris 1.5M | 2 ml |
| 10% APS | 80 ul |
| TEMED | 8 ul |
| 总 | 8 ml |
注: 浓度计算公式为 (30% × 4.8) / 8
缓冲液配置
- 10X TBE (1L)
| 成分 | 质量 |
|---|---|
| Tris | 54 g |
| EDTA-Na₂ | 3.72 g |
| 硼酸 | 27.5 g |
- 调节 PH 至 8.3