XIE/3:2026/Jan: Difference between revisions
(→1.22) |
(→1.22) |
||
| Line 55: | Line 55: | ||
|} | |} | ||
* | * | ||
*Program folding in PCR thermocycler : The mixed sample was put on a thermal ramp starting with '''a rapid heat denaturation at 80 °C for 5 min followed by cooling from 80 °C to 60 °C over 20 min, then slow cooling from 60 °C to 24 °C over 14 h'''. | |||
*Purification :The incubated samples were mixed with 400 μL of phosphate‑buffered saline (PBS) and transferred into 50 kDa molecular‑weight‑cut‑off (MWCO) centrifugal ultrafiltration units. Samples were centrifuged at 10,000 × g for 3 min, the retentate was brought back to volume with PBS, and the centrifugal ultrafiltration step was repeated; this wash/centrifugation cycle was performed a total of three times | |||
Revision as of 07:47, 26 January 2026
1.22
- Origami folding
- 折叠三种浓度的Origami（50nM,100nM,150nM）
| Samples | Volume |
|---|---|
| Scaffolld (1uM) | 5 ul |
| Staples (10uM) | 2.5 ul X 9 |
| PBS (10X) | 10 ul |
| Water | 62.5 ul |
| Samples | Volume |
|---|---|
| Scaffolld (1uM) | 10 ul |
| Staples (10uM) | 5 ul X 9 |
| PBS (10X) | 10 ul |
| Water | 35 ul |
| Samples | Volume |
|---|---|
| Scaffolld (1uM) | 15 ul |
| Staples (10uM) | 7.5 ul X 9 |
| PBS (10X) | 10 ul |
| Water | 7.5 ul |
- Program folding in PCR thermocycler : The mixed sample was put on a thermal ramp starting with a rapid heat denaturation at 80 °C for 5 min followed by cooling from 80 °C to 60 °C over 20 min, then slow cooling from 60 °C to 24 °C over 14 h.
- Purification :The incubated samples were mixed with 400 μL of phosphate‑buffered saline (PBS) and transferred into 50 kDa molecular‑weight‑cut‑off (MWCO) centrifugal ultrafiltration units. Samples were centrifuged at 10,000 × g for 3 min, the retentate was brought back to volume with PBS, and the centrifugal ultrafiltration step was repeated; this wash/centrifugation cycle was performed a total of three times